Magnetic Screw Drivers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 types of Magnetic Screw Drivers. A Tall skinny one, a skinny to big V and a short chubby one.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 555
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3 types of Magnetic Screw Drivers. Each screwdriver has a internal hole for sized for a 8mm magnet. A Tall skinny one, a skinny to big V and a short chubby one. There are two versions of each. First version holds one magnet, the “2mag” version holds two magnets. The 2mag / two magnet version holds onto the bits significantly more.
UPDATE - added a new version of the V model that is a little taller.
UPDATE - I purchased new magnets and discovered my old magnets were very thin, about 1.75mm. So I uploaded new models named "2mm" for magnets that are 1.95mm.
Settings
Supports - Nope
Brim - Maybe, I have been using one
Raft - Maybe, I have not been using one
I am using Cura with an Ender Clone (voxelab aquila). The below settings are what I used (see images) but your layer might be different depending on the layer height.
At the top of Cura, go to Extensions/Post Processing/Modify G-Code
Click Add Script
Add Pause at Height
Pause at - Layer Number
Pause Layer - 71
Park Print Head X - 0
Park Print Head Y - 200
Retraction - 4
Retraction Speed - 30
Extrude Amount - 2
Extrude Speed - 3.33333
Standby Temp - 160