.357 Magnum Cartridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
.357 Magnum Cartridge with mechanical drawing sketches and modifications to be used as Snap Caps.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 389
- Wydruki
- 0
- Wyświetlenia
- 1021
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
The .357 Smith & Wesson Magnum, .357 S&W Magnum, .357 Magnum, or 9×33mmR (as it is known in the unofficial metric designation), is a smokeless powder cartridge with a 0.357 in (9.07 mm) bullet diameter. It was created by Elmer Keith, Phillip B. Sharpe, and Douglas B. Wesson of firearm manufacturers Smith & Wesson and Winchester. The .357 Magnum cartridge is notable for its highly effective terminal ballistics.
The .357 Magnum cartridge is based upon Smith & Wesson's earlier .38 Special cartridge. It was introduced in 1935, and its use has since become widespread.
Printing Tips
Print with random seam positioning (Prusa Slicer > Print Settings > Layers and perimeters > Advanced > Seam position > Random).
Model Format
The model is available in .STL .STEP and Fusion360 (.F3D) format.
- STL and STEP files can be used in your typical Slicer Software like PrusaSlicer
- The F3D format contains the original sketch for easy customization in Fusion360
Use as Dummy Round / Snap Cap
3D printed models based on CIP cartridge dimensions are not ideal to fit or be used in real guns. Printed with non-elastic filaments like PETG or PLA, the cartridge is going to break if hit by the bolt. To create usable Snap Caps, I made the modified version (-MOD).
The -MOD file is a modified version with the following changes:
- Modifications for better printability
- Slightly smaller dimensions to fit into real guns
- Primer Pocket (Print SP.stl using flexible Filament like FilaFlexible40 as a primer. If you don't have a reloading press, you might want to scale it down to 96%)
- Drill Hole (7/64 or 3mm) inside the Primer Pocket. The Drill hole is intended to be fixed on a drill to sand and polish the model, creating a nice looking shiny finish.