Füße für Honeycomb Unterlage Lasercutter / Feet for Honeycomb Laser Bed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Füße für alle Honeycomb Schneidunterlagen für Lasercutter oder Gravierer. Feet for all Honeycombboards for Lasecutters.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 332
- Wydruki
- 2
- Wyświetlenia
- 1493
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Die Füße sollten zu allen Honeycomb Schneidunterlagen passen, in die untere Nut passt das zu der Honeycomb mitgeliferte Blech und lässt sich zum reinigen nach nach vorne herausziehen. Der Abstand zwischen Blech und Honeycomb Schneidunterlagen sorgt für einen guten Airflow des Kompressors und einer evtl. Absaugung.
Die seitlichen Nuten sollten bei allen vernieteten Unterlagen passen.
----------------------------------------------------------------------------------------------------------------
The feet should fit all feet for honeycomb laser beds, the lower groove fits the steelsheet supplied with the honeycomb so that it can be pulled out to the front for cleaning.
The side grooves should fit all riveted underlays.
The distance between the steel sheet and the Honeycomb cutting bed gives a good airflow for the compressor and a possible exhaust system.