Eero Pro 2nd gen atop outlet holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the Eero Pro (2nd gen). The original power supply slides into the bottom, and the small "PSU…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a holder for the Eero Pro (2nd gen). The original power supply slides into the bottom, and the small "PSU door" slides over the top of it to keep it in. The mesh router itself slides down through the top. Cable management is provided on the right side. As always, no additional hardware is required, and dot f3d files are included. Happy printing!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.3 mm
Infill:
10%
Filament: Hatchbox PLA White
Notes:
Unfortunately, this will print with a lot of supports. Printing at 100 mm/s @ .3 mm layers printed in 10 hours with acceptable quality. I used PLA, but ABS, PETG, or any other ridged filament should work even better.
Category: Organization