Liczymy pasujące modele…
Securely mount your Eero Pro 6, Tri-band Wi-Fi 6 system with this custom wall bracket. Please note, this product is designed exclusively for the "Eero Pro 6" model. Compatibility with other Eero models should not be assumed. If you're…
Securely mount your Eero 6, Tri-band Wi-Fi 6 system with this custom wall bracket. Please note, this product is designed exclusively for the "Eero 6" model. Compatibility with other Eero models should not be assumed. If you're looking for…
A Remix of the an Eero 6 wall mount that ended up being a few mm too short and narrow. No Support and printed in place. I believe this will be too large for the nominal Eero 6, and will only fit Eero 6+ (per picture). Print Settings…
Fits the Eero Pro 6E vertically for wall mount. Pretty simple mount but it fits the contours of the unit well. Lay flat onto the base of the model and it prints without supports in under 3 hours. I used PETG as it lives in the garage.
Eero 6 Pro Ceiling Mount made by request. Feel free to make adjustments, just cite your source. Print Settings Printer Brand: Creality Printer: CR10S PRO **Rafts:** No Supports: Yes **Resolution:** 0.4 Infill: 25% **Filament:** […
Wall mount for Eero 6 Pro. Eero can be mounted up or down on this bracket. Attach to the wall with nails or screws. Designed to flex slightly to hold the Eero steady Designed for a eero Pro (2nd-gen), model number B010001 I printed in PLA…
This is a wall mount that fits the Eero Pro 6 wireless access point. This can be printed upside down with supports under the camferred platform, or vertically on face with screw holes. Version 2 has a larger opening on the bottom, which…
I was reading through some mounting information on the Eero 6 Pro and saw that it should be mounted horizontally because of the antennas. I couldn't find a good mount so remixed a great shelf for the Eero 5 (…
I wanted a way to hang Eero off the wall, and avoid sticking/screwing anything permanently in place. Couldn't find anything that did exactly what I wanted, so decided to make my own. This holder fits both Eero 6 and Eero 6+ units. I'm…
This is a mount for the Eero 6e Pro. I wanted something that I didn't have to drill into my wall, use anchors, etc. I wanted to be able to mount it on the duplex outlet (not decorator style) and utilize it facing down. This made cable…
This is a wall mountable holder for the amazon eero 6E pro. It has plenty of honeycombed holes for ventilation and has supports on the back wall to prevent it from slipping. The device can get quite warm so these features should help to…
I found my eero 6+ has a very warm bottom. The temperature measures to about 50 C. I'm worrying this could have an impact on either the longevity of the eero itself or my table top. So I designed a ring style base to fit the chamfer of…
I made this model to hold up a eero 6 plus on the wall. It doesn't have any sort of attachment included so you can mix and match with however you're putting things on the wall. I wanted to mount it on a DIN rail. I found these mounting…
This is a Jeep Cheerokee XJ centre rim cup. I took measurements from original part and designed a clipping mechanism devoted for 3d prints. It fits well and holds on nicely. to remove it - push it from behind or rise 2 clips. Photo on rim…
I wanted to clean up where I had my Eero wifi router plugged in, so here you go. This mash-up replaces the outlet cover with no additional holes in the wall. It simply fits nice and looks good. :) I have included 5 versions. A universal…
This is a custom-designed wall mount specifically crafted for the Eero 2nd Generation WiFi router.
Little Green Army Women : Star Wars : Andor : Dedra Meero
A top mounted rack for the Amazon Eero 6+ Plus Mesh WiFi, equipped with holes for the original USB Type-C power cable management. I also have added some holes to allow heat dissipation. It might fit other router brand with the size around…
10% Infill seems to be enough for this model. I printed with Fillamentium White PLA. It seems to fit the Eero Pro 6E Mesh well and within an hour the unit seems to be cooler and the desktop is no longer hot.
Supports are needed per the original model. This is for someone who needs their Eero 6 Pro mounted to the left (or the right if you flip it in your slicer) of their vertical wall socket, as opposed to the original, which had only a…
Andor Dedra Meero ISB datapad for 1:6 and 1:12 scale figures. This model is my recreation of the ISB datapad used by Dedra Meero in Andor. This is a simple 1 piece model and is roughly scaled to 1:6 for 12 inch figures such as Hot Toys…
Credits to Fanblox company for the Modern body file and the limb internal file.
This was fun to make :)
Camera Mount designed for vibration dampening, VTX/LED strip holder, and 30.5x30.5mm to 20x20mm flight controller mount for the BeeRotor 180 Frame. Read my full build guide here:…
Print with supports for the shelf slot, and in something that can take a bit of flex. The wall-side clamp is preloaded a bit to clamp well. The shelf slot is a close fit, but shouldn't stretch, as it would separate the layer lines. Due to…
A space saving spool holder/filament guide system for use with the Prusa MMU2. Low drag on the filament. Drag does not increase as much as spool empties. Less tangling of filament behind printer/keeps looped filament up and clear of…
eero 7 Router Riser A purpose-designed riser for the eero 7, providing a raised platform that lifts the router off the desk or shelf while leaving open space underneath to encourage airflow and help reduce heat buildup. The rear cable…
Use this to hold a cane to the oval frame bar on the Knee Rover All Terrain Pro scooter. You can leave it on the cane and then just snap it on to the scooter and make your getaway!
sk8inggggggg, cuz its T-V TIIIIIIIIIIMMMMMEEEEEEEEE---wrong tv head
Printed with same settings as the original. This just adds a different mount on the back.
Combine this with 3 snaps and t screws and it hols really well!
I have re-enforced the back of it because it didn't look durable enough, and moved and countersunk the mounting holes. Printed in place, no support on Reprap Fisher Delta, 0.25mm layers.
Little Green Army Women : Star Wars : Andor : Dedra Meero
A modified EERO 6 wall mount - modified to allow it to be attached to a UK wall socket blanking plate. This takes an already remixed EERO 6 wall mount a little further by including a section that allows the mounting holes to be closer…
Inspired by http://www.thingiverse.com/thing:1370241 by gpvillamil, I designed a mount to keep the eero's default orientation but suspend it from under a desk. Note that the material in your desk may cause interference. The eero blog says…
This will allow you to mount your router up on the wall, out of the way and get a better signal. There is an interference fit, so the router just snaps into the mount.
IKEA SKÅDIS (SKADIS) mount for the eero 6+. The supports are a bit annoying, but is on the back (eg facing the board), so shouldn't be a huge problem. NOTE: Please check that you have the correct eero model before printing - the eeros…
Custom-designed horizontal wall mount for the Eero 6 Pro Model E(works for none E version as well) . This mount allows you to install your Eero 6 Pro router horizontally against any wall , keeping it secure, elevated, and out of the way —…
This is a wallmount for the Eero POE Gateway. I could not find a printable wallmount option for the Eero Gateway anywhere, and the one for purchase I didn't like the idea of it. There are screw holes under the rubber feet on the bottom of…
witziger Kapselheber für Kronkorken Bei 4mm einen Stop erzeugen und 5cent einlegen. Im Datensatz für die MMU kann man die Farben der Einzelteile der Baugruppe ändern! Viel Spaß beim Drucken!
Combine this with 3 snaps and t screws and it hols really well!
I have re-enforced the back of it because it didn't look durable enough, and moved and countersunk the mounting holes. Printed in place, no support on Reprap Fisher Delta, 0.25mm layers.
A modified EERO 6 wall mount - modified to allow it to be attached to a UK wall socket blanking plate. This takes an already remixed EERO 6 wall mount a little further by including a section that allows the mounting holes to be closer…
This is a holder for the Eero Pro (2nd gen). The original power supply slides into the bottom, and the small "PSU door" slides over the top of it to keep it in. The mesh router itself slides down through the top. Cable management is…
I was reading through some mounting information on the Eero 6 Pro and saw that it should be mounted horizontally because of the antennas. I couldn't find a good mount so remixed a great shelf for the Eero 5 but used the proper (larger)…
needed this because I noticed my eero was getting hot quick one hour print
I was reading through some mounting information on the Eero 6 Pro and saw that it should be mounted horizontally because of the antennas. However, I had a situation where mounting it horizontally wouldn't make sense because it would stick…
Tip for Gardena, and similar, root watering system. Inserts into 10mm pipefitting, see reference image. Printed in PETG. The bottom of the tip should print about 10mm to fit snuggly into the pipe.
I couldn't find a wall mount for my new eero pro wifi 6 routers yet so I modeled my own and decided to share. Feel free to make any modifications, just please credit the owner. Thanks and enjoy :) Print Settings Printer Brand: Creality…
My own model of an outlet cover and mount for an eero pro 6 wall mount. Please feel free to use, please cite here as sourse. Print Settings Printer Brand: Creality Printer: CR-10S **Rafts:** No Supports: Yes **Resolution:** 0.4 Infill:…
Remixed lukeskymaker Erro mount. Took off the side plate, put a hole in the middle to try and dissipate some heat. If you have these you know they get hot. Also added spacers in the rear to bring it out from the wall a bit for heat…
This remixed mount is based on the design found at https://www.thingiverse.com/thing:6024474 I have made the mount thicker as the original I found to be very thin and prone to cracking at the base, I have also widened the mounting holes…
Created a horizontal wall mount for an eero 6 that can mount to the wall. It has 2 #5 counter sunk holes in the back to mount on the wall. I extended the back to create more of a gap along the wall if you wanted the cables to come via the…
