MagTag Case and Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D Print a Snap Fit Case or Stand for the Adafruit MagTag
- Ocena
- 5 / 5
- Polubienia
- 57
- Pobrania
- 230
- Wydruki
- 8
- Wyświetlenia
- 2272
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
3D Print a Snap Fit Case or Stand for the Adafruit MagTag
Print instructions
This case is designed to protect the MagTag. It features cutouts for the four user buttons, USB-C, and on/off switch. The reset and DFU side buttons feature reliefs that allow the overlays to actuate the switches. Use vinyl to create covers with beautifully glossy holographic decals.
Want to prop up the MagTag on your desk? This simple 3D printed stand mounts the MagTag at a 70 degree angle for perfect viewing. The wide bottom prevents the stand from tipping over. An hole in the lower center allows a STEMMA cable to pass through for connecting other I2C sensors.
Adafruit MagTag
https://adafru.it/4800
420mAh Battery
https://www.adafruit.com/product/4236
M3 Magnet Feet
https://www.adafruit.com/product/4631
Learn Guide for Assembly Photos
https://learn.adafruit.com/magtag-3d-printed-stand-case/