Rezodo weather station: anemometer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is part of the weather station which is itself one device into the Rezodo project! Full description can be found…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is part of the weather station which is itself one device into the Rezodo project!
Full description can be found here (don't hesitate to follow and like this open source open hardware project please!) https://hackaday.io/project/190577-rezodo-long-range-irrigation-and-weather-station
This project is finalist of the Hackaday's Prize 2023.
Specific pages for the Weather staion are here :
anemometer: https://hackaday.io/project/190577/log/218056-the-anemometer
wind directionn sensor: https://hackaday.io/project/190577/log/218074-the-wind-direction-sensor
rain gauge: https://hackaday.io/project/190577/log/218006-the-rain-gauge
Print Settings
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
.3mm
Infill:
20
Filament: none PET
Notes:
Printed with PET filament made with my Pullstruder machine : https://hackaday.io/project/185196-pullstruder-from-plastic-bottle-to-pet-filament
Category: Electronics