Sofle RGB Full Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Sofle RGB split keyboard.
- Ocena
- 5 / 5
- Polubienia
- 62
- Pobrania
- 497
- Wydruki
- 1
- Wyświetlenia
- 3441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a closed, full case for the Sofle RGB split keyboard.
https://josefadamcik.github.io/SofleKeyboard/build_guide_rgb.html
https://github.com/josefadamcik/SofleKeyboard/tree/master/Sofle_RGB
Features:
- transparent bottom for the drop lights
- magnetic controller covers to easily access or swap the controllers
- suitable rotary knob (friction fit)
- magnetic reset button cover
The BOM is the same like the Sofle RGB except for the following changes:
- no top and bottom plates needed
- 10 2x1mm round neodymium magnets per side (20 in total)
- short pin headers for the controllers, e.g. https://www.aliexpress.com/item/32993269493.html
I glued the magnets with super glue. Pay attention to the pole orientation.
I also added a stencil helper. This is for the stencil for reflow soldering that you can add to the order of the main pcb (e.g. jlcpcb). With the helper the stencil is flat on the pcb which makes the application of the soldering paste easier and cleaner.
Designing it was a lot of work (one of my biggest modeling projects so far) but i am very happy how it turned out.
CAD files attached, feel free to remix.