Screwless, Adhesionless Cable Hole Cover for Cat-7 8mm Cable.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to beautify ugly cables that come through the wall.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
When I routed my Network Cable through our apartment I simply forgot putting something over the drill holes BEFORE putting the cable through. Therefore I had to devise a model that allows me to run the cable through while holding firm against the wall using only the cable as tensioner. The two parts slot in quite nicely (0.2mm tolerance all around, depending on your printer you might have to scale the inlet down slightly).
To install, first place the inlet below the cable, the high end facing the hole. Then slide the cover over the inlet. This will lock the cable in place at an angle; the cable bending pressure will keep the parts together and the angle of the inlet will cause the cover to fit to the wall snugly.