1 / 8
Crosman Pistol Picatinny Rail Block 2-part 1377/1322 — zdjęcie 1
1 / 8

Crosman Pistol Picatinny Rail Block 2-part 1377/1322

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol,…

Ocena
5 / 5
Polubienia
10
Pobrania
320
Wydruki
1
Wyświetlenia
1556
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low profile, pain-free design, this works excellently.

Each block is 14.75 long.

I suspect this would fit the 2240 as well due to very similar dimensions.

You'll probably want to print either two or four ofCrosman_Picatinny_Rail_Block_Half.stl.

Print on the flat side.

Fit is intentionally very tight, as don't want optic to sway. I went over the pointy bits with a lighter to make them fit slightly smoother.

Print Settings

Printer Brand:

Creality

Printer:

Ender-3 v2

Rafts:

Yes

Supports:

Yes

Resolution:

0.12-0.2mm

Infill:

20-40% gyroid

Filament: eSun PLA+ Black


Notes:

Go over sharp bits quickly with a lighter to smooth them out.

Category: Sport & Outdoors

Tagi