Crosman Pistol Picatinny Rail Block 2-part 1377/1322
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol,…
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 322
- Makes
- 1
- Views
- 1,564
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Many of the designs on here for mounting a rail on the 1377 are rather imperfect, rely on disassembly of the pistol, have model errors, are low resolution, or incorrect dimensions. This solves the issue for me. I wanted a screwless, low profile, pain-free design, this works excellently.
Each block is 14.75 long.
I suspect this would fit the 2240 as well due to very similar dimensions.
You'll probably want to print either two or four ofCrosman_Picatinny_Rail_Block_Half.stl.
Print on the flat side.
Fit is intentionally very tight, as don't want optic to sway. I went over the pointy bits with a lighter to make them fit slightly smoother.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 v2
Rafts:
Yes
Supports:
Yes
Resolution:
0.12-0.2mm
Infill:
20-40% gyroid
Filament: eSun PLA+ Black
Notes:
Go over sharp bits quickly with a lighter to smooth them out.
Category: Sport & Outdoors