Lathe Chuck Cover - PSI Barracuda2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for a Barracuda2 Lathe Chuck by PSI
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 351
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Cover for a Barracuda2 Lathe Chuck by PSI
Link to chuck: https://www.pennstateind.com/store/CSC3500SE.html
One of the drawbacks of this lathe chuck design is that the back is open. This closes the back and also can cover the wrench holes by rotating it around the chuck. The design also includes indexing. The printed part simply snaps on to 2 minor recesses in the chuck along the circumference.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
70+
Filament: any PLA or PLA+ brass
Notes:
You may need to scale depending on your printer. I needed a 101% uniform scale in Cura for it to snap on properly.
Also, the snap fit is kind of tight and had the part break with some old and brittle PLA so PLA+ may work better.Category: Machine Tools