Voron 2.4 "Crash-Free" Nozzle Brush
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Unlike other Voron 2.4 nozzle brushes, this one sits almost flush with bed - the extruder never crashes into the brush.
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 448
- Wydruki
- 5
- Wyświetlenia
- 3575
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When searching for a Voron 2.4 nozzle brush mod I noticed that the available mods stick up from the bed high enough to interfere with the extruder's movement - when the extruder moves at the very back of the bed, including knocking the Klicky/Euclid probe off the extruder.
This nozzle brush sits almost flush with bed - so the extruder never crashes into the brush.
Unlike other nozzle brush mods, this one does not have a bucket. I decided to omit the bucket because the bucket tends to take up too much space that may be needed for other mods - and because under normal conditions there is hardly any plastic brushed from the nozzle anyway.
Instructions
- Instructions and up-to-date files are available here https://makerspet.com/blog/voron-2-nozzle-brush/
If you are reasonably pleased with this mod, please leave a like to help others discover this contribution!
Happy 3D printing!