Desk Clip Cable Holder / Tidy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cable clip designed to slide onto the edges of your desk and hold cables within it. This design doesn't…
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 589
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a cable clip designed to slide onto the edges of your desk and hold cables within it. This design doesn't require any tools or permanent fixings and only requires the printed parts.
There is a central lug that stops the clips from sliding off either way so the only method of removal is to spread the clip and lift off the mount.
I printed mine in PLA with 3 walls and 10% infill (Prusa Slic3r), in retrospect it may be better with 2 walls as the clip is quite stiff to remove and may not be possible in some materials. Both parts require no supports.
Included are the Solidworks files within which there is 1 global variable which is your desk thickness, feel free to message and ask for additional sizes to be added. Currently included are 30, 34.3, 35, 40, 45, 50 (mm).
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.32mm
Infill:
10%
Filament: Eryone PLA Silver
Notes:
2 to 3 walls, 2 to 3 top bottom.
Category: Organization