Prusa MMU Enclosure Centering Part - Offset hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Because the IKEA Lack table I used for my enclosure had already been assembled according to the IKEA assembly…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 158
- Wydruki
- 5
- Wyświetlenia
- 1583
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Because the IKEA Lack table I used for my enclosure had already been assembled according to the IKEA assembly instructions, one of the holes in the centering part lines up with the hole already created by the double sided IKEA screws.
So I remixed the part to move the hole over just a little bit.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.