1 / 3
Mounting Clamps for Halot Mage Build Plate, into VEVOR JPS-40A 10L Ultrasonic Cleaner — zdjęcie 1
1 / 3

Mounting Clamps for Halot Mage Build Plate, into VEVOR JPS-40A 10L Ultrasonic Cleaner

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

4 of those clamps to comfortably mount the build plate of the Creality Halot Mage, into the ultrasonic cleaner.

Ocena
0 / 5
Polubienia
7
Pobrania
45
Wydruki
0
Wyświetlenia
1012
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

With those clamps you can place your entire build plate into the ultrasonic cleaner. At optimal fill height, there is about 2cm left on top, so no spilling should occur. Max height of models on the build plate should be around 11.5cm.

 

Print this in PETG with 4 perimeters, 5 bottom and 5 top layers and 5% gyroid infill, 0.4mm nozzle. Feel free to increase this.

 

This is for use with water and waterwashable resins. Do not use IPA directly in the ultrasonic cleaner!

Tagi