1 / 3
Mounting Clamps for Halot Mage Build Plate, into VEVOR JPS-40A 10L Ultrasonic Cleaner
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4 of those clamps to comfortably mount the build plate of the Creality Halot Mage, into the ultrasonic cleaner.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 45
- Makes
- 0
- Views
- 1,012
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
With those clamps you can place your entire build plate into the ultrasonic cleaner. At optimal fill height, there is about 2cm left on top, so no spilling should occur. Max height of models on the build plate should be around 11.5cm.
Print this in PETG with 4 perimeters, 5 bottom and 5 top layers and 5% gyroid infill, 0.4mm nozzle. Feel free to increase this.
This is for use with water and waterwashable resins. Do not use IPA directly in the ultrasonic cleaner!