Enclosed Voron 2020 Extrusion Frame Camera Mount System Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting adapter for enclosed Voron Design printers for use with the "Articulating Raspberry Pi Camera Mount" system
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 107
- Wydruki
- 4
- Wyświetlenia
- 812
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This mounting adapter allows clearance for the panels on enclosed Voron printers. It is a mashup of the “Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2 by Sneaks” system and the mount used by the “Removable Doors” mod by ElPoPo: https://mods.vorondesign.com/detail/WqhhKrXksAZ4omhHS1RY4Q
Multiple mounting options (as you can see in the pictures) and you can still open the doors if you mount on front slots.
All I did was smash them together to make what I needed. No sense re-inventing the wheel. Printing in ABS with PIF settings is recommended.
Use an M3x8 SHCS and an M3 T-Slot Hammer Head Nut to mount it to the frame, the same as the standard panel clips.