Drilling depth gauges for drills from 1mm to 11mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two drilling depth gauges that cover drill diameters from 1mm to 11mm
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 251
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Two drilling depth sensors that cover the drill diameter from 1 mm to 11 mm.
It is convenient to have only 2 limiters instead of 5 or 6. They are easier to find storage space, they take up less space in the case for a screwdriver or drill, which is important when working mobile.
When choosing mounting screws of the same length, they have a very small imbalance.
Each of them consists of two identical parts fastened with M3 screws.
After printing, it is necessary to cut the m3 thread in smaller holes.
I used plastic PLA, nozzle 0.4, layer thickness 0.2
Printed without supports. The GCod file contains both stops in the correct position for printing without supports in the Prusa slicer
Please take a look at my page, maybe you will find something interesting for yourself
https://www.printables.com/social/358060-evgenii-karlov/models