Beefy replacement stepladder foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fairly beefy replacement stepladder foot. Fits a 1-inch diameter tube, but would easily scale up or down.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
Beefy replacement foot for my stepladder. I think It's quite a bit better than the original which was an extremely cheap and thin plastic cap which eventually just wore out. This foot has a 1-inch wide opening, but you could probably scale it up or down 2x without a problem. I made the walls 3mm thick, and the base 5mm thick, so hopefully it lasts for a while.
I printed using Overture TPU, which I believe has a Shore hardness of 95A, which is probably just about the right mix between flexibility and durability. If you make it with a different filament, let us know how it goes. Make sure you set perimeters and infill to result in a solid print. I included the 3mf file so you can see my settings.
I've included the Fusion 360 file if you want to modify/remix, but it's not fully parameterized, so caveat emptor!