Beefy replacement stepladder foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fairly beefy replacement stepladder foot. Fits a 1-inch diameter tube, but would easily scale up or down.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 124
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Beefy replacement foot for my stepladder. I think It's quite a bit better than the original which was an extremely cheap and thin plastic cap which eventually just wore out. This foot has a 1-inch wide opening, but you could probably scale it up or down 2x without a problem. I made the walls 3mm thick, and the base 5mm thick, so hopefully it lasts for a while.
I printed using Overture TPU, which I believe has a Shore hardness of 95A, which is probably just about the right mix between flexibility and durability. If you make it with a different filament, let us know how it goes. Make sure you set perimeters and infill to result in a solid print. I included the 3mf file so you can see my settings.
I've included the Fusion 360 file if you want to modify/remix, but it's not fully parameterized, so caveat emptor!