Counting matching models…
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
a foot for a pool ladder so keep it in place on a deck. The ladder just stands in it, but can not move while entering the pool. Ladder still ease removeable
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
this support often breaks, and i had to fine-tune many details to achieve a satisfactory result: this is the last iteration! i suggest to print it with 100% infill and PC material for higher durability and better elastic performances at…
Háček na pověšení ručníku na žebříkovým radiátoru. Tištěno z PETG, perimetry 3 a tloušťky 0,2mm výplň 10%
I designed this “Love Ladder” for my wife for Valentine's Day. Printed an extra ladder for my daughter for her doll house. Included thick and thin ladder designs. Printed ladder in Inland PLA+ White. Printed the thick version standing up…
Twisted ladder line spacers 25mm conductor distance 24° twist 12mm tall 2.5mm wire diameter (with insulation) Printed in ASA, no infill, 3 perimeters. 2 part assembly that simply clips together. Separators have a 24° twist, so you will…
Helps to dry your bottle and water bladder faster. My water bladder is dry after 2 hours and the bottle is dry after a little more than 1 hour. You only need a 40mm noctua fan, no tools and no screws.
Print Your Own Backyard Classic – No Hardware Needed! This fully 3D printable Ladder Toss frame is the perfect addition to your summer fun lineup. Designed with an easy snap-fit system , it requires no screws, glue, or tools —just print…
I made this for a friend who's ladderball clips were failing because they were weak. I reverse engineered it and remade it stronger in the main points of failure. This was a ladderball kit purchased on amazon. I'm not sure of the link,…
Print with .3mm layer height, TPU filament, 5 top shell layers, 25% infill. Reuse the metal washers from the original pads.
This foot was printed in PETG and with a TPU pad to act as anty slipery. It can be printed just the PETG / PLA part only, but if you have TPU it works very well. The pad was glued with contact glue.
This holder is designed to attach under the bottom edge of an IKEA SKÅDIS board, allowing you to hang a small ladder (or even a slightly larger one, depending on your setup). It replaces the original SKÅDIS spacers at the bottom. ⚠…
A pair of solid hooks so I can hang my ladder from my ceiling (floor joists). This is a relatively heavy 32' extension ladder. I have the hooks facing opposite directions, and I use the extension/contraction of the ladder to align and…
This covers the top of the rails of my 20' Louisville extension ladder. I printed it in TPU to stop the ladder from scarring the house. The openscad file has been parameterized so that the width, height and depth can be adjusted to fit…
Hook designed to hang an empty water bladder from a closet hanging rod. Includes a void for a 8 by 3 mm circular embedded magnet to hold the magnetic drinking tube. Designed originally for an Osprey Hydraulics Reservoir, but generic…
Two replacement foot plugs for aluminium household ladders (e.g., Krause and similar): one for 40×20 mm legs and one for 33×20 mm legs. Print the plugs in ABS or PETG. The soles can be printed in TPU with 100% infill, or cut from a rubber…
This is a foot for the ladder type Hailo Selecta. The ladder it matches is from about the year 2000. The foot is slightly oval. Measurements: 40mm x 24mm At the side the width is around 18mm-19mm. Printed in TPU 95. I used 5 bottom and 5…
Holder for mounting of the Zarges Scana/Z200 ladder in the ceiling. It will probably also work for other variants, but it is specifically made for this type. The model contains two objects, where a small object for aligning a Zarges logo…
Parametric hydration pack Bladder Hanger Change the size of the hook to accommodate your hanging needs. Make sure to add a few mm extra so the fitment isn't so tight (unless you prefer it that way then go right ahead) Default hook size is…
Replacement feets for Hailo ladders (like Modell 8900): inner size of Aluminium profile on large side: 40 x 17 mm outer size of profile on large side: 43 x 20 mm inner size of Aluminium profile small side: 32 x 17 mm outer size of profile…
If you downloaded the model, it means you are interested in it. Don't forget to like it, please!
Using TPU is crucial for this model. Other plastics can damage the pool surface (or smudge the wall :) ) TPU is perfect for gripping, both on the ladder tube and on the wall surface. The more elastic the TPU is, the better. Its elasticity…
Roy: Moss, I don't like to be negative about it, but everything you invent is worthless. Moss: Ah, well, prepare to put mustard on those words, for you will soon be consuming them along with this slice of humble pie that comes direct from…
A unique 3D printable creation — this Ladder Style Earring Organizer, Tiered Rungs, Holds Many Earrings, Vanity Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
made in two pieces, to enable printing on Bambulabs.
Made in FreeCAD. Printed in PETG. Pictured is the Halio Selekta. 4 walls 4 top/bottom layers. 20% infill.
In case your ladder feet has worn out, replace them with this model. Print in TPU. Use some glue to make sure they stay in place. If you are worried they might move anyway, you could just use a marker pen to draw a line so you can see if…
This version fit 2 sizes: 33x21mm 40x21mm The file can be adjusted to match your alu profiles. Here is the Onshape source Printed with support and with enough XY spacing from part, no need to remove them. Feet are secured with a rivet 4mm.
This holder is designed to securely fix the end of a ladder with a 25 mm rod diameter. It is specifically made for RV (campervan/motorhome) loft beds, where the ladder can be repurposed as a safety guard. The integrated screw mounting…
highly suggest doing a test print and adjusting the scaling to suit your needs Designed for a hammer-in friction fit
print surface which has contact to floor down, no support needed Highly suggest doing a test print and maybe adjusting the scaling depending on how you need your fit. Designed for friction fit (hammer in)
Use standard Paracord and what ever knots you see fit to attach ladder "links' together.
Replacemet ladder foot for a “Zarges 40229” (Ersatzfuß für “Zarges 40229” Leiter.)
Simple portable box that forms a board for a small board game. I made this as a replacement for one of my kids. The playing surface is 180mm x 180mm. It is divided into 2 sections each 180mm x 90mm. You can rescue a broken board or simply…
pour remplacer la bielle d'originelle en tôle qui s'est cassé à la longue il faut 1 écrou de M5 , 1 vis de 5x25 et 2 vis de 4x16 n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
Just a simple 1*1 TTRPG ladder Printed in PLA at 0.2mm and 15% infill No support needed If you wan't the ladder climbable by minis, you can glue the step on the middle bar Compatible for 1*1 inch grid map
Recommend to use supports and 100% infill on ladder part. Need M3 screw for mounting the spare tire. For mountin in chassis using just existing holes/screws from orignal mount.
I make and sell fountain pens and have recently released a model which features a novel filling system using a twist bladder printed from flexible TPE. The bladder has survived over a hundred thousand actuations and so it is unlikely to…
Make sure you print it with at least 3 layers of wall and especially good internal reinforcement. Safety first!
Replacement ladder for tootsie toy fire engine. Has 3 levels. Printed in PET. Supports on the main ladder section and none on the others. Had to do a little sanding to get the ladders to slide smoothly and not bind.
An M14 threaded rod is used as the basic handle, it is strong enough to hold a bucket full of water. I printed it in PLA but I recommend PetG or something more durable.
Replacement for a foot for an aluminum ladder. Inner profile is 40 x 21.5mm .. and a lot of radii:-). Printed in ASA which was in the printer.
Another spare foot for a ladder with round profile. - My neighbor saw me make this one: https://www.printables.com/model/1000873-spare-foot-for-ladder and brought along his old ladder…:-)
Printed with PLA https://www.youtube.com/playlist?list=PLNkED_syDmprsKfn9pWMwv1IGdb8OwBy-
Cover the mouth piece of your water bladder against dirt. The design is printed in TPU which allows to slide the cover on and off without removing the tube. The cover is held in place by a friction fit.
Reddit post with video: https://www.reddit.com/r/Hydroponics/comments/1fe9l4d/3d_printed_ladderpot_for_morning_glory_and_other/ Print settings I've used A1 Mini with: 0.6mm nozzle (so it's faster) 0.24 - 0.3mm layer height 5-7 walls - as…
Comme tout possesseur d’escabeau, je me suis déjà retrouvé perché dans mon salon avec un patin abimé sur l'échelle, des rayures sur le parquet et une perte de stabilité. Plutôt que la réparation habituelle, j'ai pris quelques minutes pour…
A remix from a model by theRatchet. It's a part that allows the water bladder to dry properly. I've slightly changed the shape to fit better the bladders from Camelbak. It's possible to add some characther in the middle of the part if you…
A replacement hook for a “ Compact Attic Ladder Pull Pole Replacement Kit ”. Meant to be mounted on the end of the 24 inch long aluminum pole . The two nubs on top of the hook are meant to fit into the attic latch assembly like a key. The…
I designed this with a USWE 2 liter water bladder. Fit is just a little tight because I hang the bladder upside down to dry. Scale the device to your own bladder. One is a little longer for the bigger bladders. I made that one slightly…
Simple designed aluminum household ladder bracket. Parametric model made with Freecad 1.0 RC1. STEP file is also available. Easy to print, printing doesn't require any support. Use PETG, ABS, or PLA with higher infill.
Bracket for Werner step ladder, might work for other brands. Print: Use a hard material like asa, abs or petg. Print vertically for improved strength. Could have added a bit of an angle but i wanted it snug. Lips are a bit high, can edit…
https://www.printables.com/model/1012996-snap-tool-rack-blocks I used two pieces to hang mine, printed in PETG Use at your own risk.
I designed this for my voluntary fire department as a relief in finding the correct angle of the ladder you are trying to errect. Simply clamp this handy device on one of your first beames and it will show you the best angle in which the…
Needed some feet for my old Altrex aluminium ladder. The old rubber feet where long gone. I printed mine in PLA with 5 perimeters. Be aware! Depending on the surface the ladder is placed on, plastic feet may be very slippery! Print with…
Introducing The Bladder Buddy, the innovative 3D printed solution for drying your Camelbak or other hydration bladders quickly and hygienically. This unique hanger features an internal expanding mechanism that securely holds the bladder…
These plastic feet are replacement parts for an aluminum household ladder. The aluminum legs are rather thin, and work their way through the original feet, after some time. The result is, that we have the ladder standing on the sharp edge…
I saw this on a local flea market and thought somebody could use it for his/her home. IMPORTANT: carefully read the advise for the magnets! 1. Ladder consists of three files: Base numbers (imbedded in the bottom of the ladder). You can…
Material: TPU A85 semi-soft von Extrudr Dieses Filament ist auch druckbar mit Bowden-Extruder. This filament is also printable with Bowden extruder https://www.3djake.at/extrudr/tpu-semi-soft-schwarz?sai=3867 Druckeinstellungen: Layerhöhe…
Replacement ladder for the October 5th, 2024 Fire Rescue Truck DIY Kid's Workshop
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
Bei meiner recht alten Leiter vom Discounter waren die Füsse schon sehr marode. Diese Füsse ersetzen diese und sind sehr stabil. Innenmasse= Masse Füsse 27*60mm Mit TPU und 50% Infill + Stützen gedruckt.
The sharp edges of the aluminum are easy to get hurt on, so I made these protective caps. Replacement endcaps for a Youngman new easiway loft ladder Inner dimensions are 38x17mm ( the part that is shaped like the letter i ) Outer…
Hello. Here I present the rear ladder for the Defender. It is mounted in place of a spare tire with a screw. Additionally it "clips” on the roof frame. It got a holder for a fire extinguisher which is held by a zip tie. sdg
Háček na žebřík, který přesně obejme trubky a dobře drží. Pokud bude potřeba uprava modelu na jiný žebřík napiš a upravím.
Remixed this to make it a little wider. The hydration water tube I have is insulated, so it's a little wider.
a set of printed parts to attach to a conventional household folding ladder to make it better suited as a hose mounting aid there are caps for the “bottom front” - the part that touches the ground on the side you climb the ladder caps for…
made this to carry 4' ladder on front of work cart. Fits Dryser utility cart. Has threaded hole for 1/4 20 bolt . use lube to run bolt in. I have used for a week so far and it is holding up. I only used 15% infill but you could make much…
Print with 20% infill, recommended minimum 6 vertical shells /perimeters/. Support on build plate.
Double the wheels from two to four because why not
Hook & Ladder Fire Station from Ghostbusters Movie - Storage Box A storage box based on the Hook & Ladder Fire Station from Ghostbusters. Why? you ask, 'I couldn't help it, it just popped in there'. RENDERED IMAGE
It needs accurate measurement of my ladder’s rim thickness and width by a vernier. So, it can be locked in position by a simple hanging with a special insertion angle and push it slightly upward before landing this ladder completely on a…
Due to the age of my ladder and storage outside under the shower, the previous plastic feet have become brittle. I have redesigned them accordingly and printed them in PETG. They work wonderfully and fit perfectly. The dimensions of the…
Phone holder designed for lofted beds. Works with all lofted beds by attaching to the ladder. Comes with cord clip for when phone is not being stored. Comes with cord slot for charging with phone in the holder. Printing 120g 0.2mm layer…
Replacement ladder for Mini Tonka Fire trucks from 1970's. Not 100% accurate due to the original having rungs that inset on both sides. Will include initially two versions. I can provide a symmetric offset rung version if anyone wants it.
Nov. 12, 2024 V1 Build 15: First release The Rolling Stones used to sing a famous song: “You can't always get what you want” But sometimes a ladder can help with that ;) The provided 3MF file can be used with: Orca Slicer/Bambu Studio:…
a foot for a pool ladder so keep it in place on a deck. The ladder just stands in it, but can not move while entering the pool. Ladder still ease removeable
These sights are designed to be used with large projectile firing blasters like Nerf Mega or Mega XL, for example i mainly use them with my Wildstyle. The name derives from the holes on the front sight that make the ladder unlike normal…
Material: PETG Nozzle: 0.4mm Layer height: 0.2mm Supports: Support on build plate only Infill: 80% Fill pattern: Gyroid Printed as on screenshot.
An easy-to-print ladder or bridge for pet birds! I needed something to help my feathered friend off his cage until his clipped wings healed, and this does the trick! he loves using it to either get from his cage to the ground or adjacent…
I increased gap width and hook vertical teeth length to lock ladder rim in position after it is inserted in a 45 degree angle and twisted it to land on the horizontal bar.
I found that after using my water bladder in my hydration pack that it remained wet inside for an extended period of time. I tried a few of the inserts that hold the bladder open but it still remained wet after many days. This print uses…
Swimming ladder clamp replacement for the folding ladder behind my ETAP 23i. Should fit more ladder with similar ladders. Print in PETG for strength, flexibility and UV resistance.
I took some inspiration from some super fancy metal ladder lock adjusters that I saw on Facebook that people use for headbands and decided to design one myself. I made three different sizes if you wanted to use it for headbands, belts or…
I was affraid of breaking, so i made it with 100% infill 0,2 mm height organic support I made pictures about the hole that needs to be fit in.
Basic hook for IKEA Satsumas plant stand (IKEA article number 102.581.55) Grip base model included for easy modification Inventor and step files included I printed in PLA, 0.2mm layer height, 15% infill. No support required
Hooks to hold your folding step ladder. Printed in ABS but should work fine in PLA. Countersunk holes for standard construction screws.
Replacement for end caps of an aluminum ladder. With time the original caps got brittle and got broken. In the picture you can see the ladder with already 3 replaced parts. The cap is designed for an 72 x 20 mm aluminum frame. It is fixed…
This hook mounts a Hailo Standing Step Ladder to a wall. I've designed it to hold the plastic top part of my Hailo L60 (PN: 8160-507) ladder - but probably will also fit others with a similar plastic part. The part is massive and holds…
