1 / 2
Cap for Ladder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
Replacement for end caps of an aluminum ladder. With time the original caps got brittle and got broken. In the picture you can see the ladder with already 3 replaced parts.
The cap is designed for an 72 x 20 mm aluminum frame. It is fixed by the notches on each smaller side of the ladder frame (see picture).
Printing Instructions
- Material: TPU
- Infill: 50%
- Support: yes