1 / 4
IKEA Metod Förbättra legclip for cover panel incl. extention variants — zdjęcie 1
1 / 4

IKEA Metod Förbättra legclip for cover panel incl. extention variants

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this legclips for the plinth for IKEA Metod are designed to be more stable and for different length and sliceoptions

Ocena
5 / 5
Polubienia
52
Pobrania
755
Wydruki
3
Wyświetlenia
2283
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this feet / legclips for the IKEA kitchen METOD and its plinth FÖRBÄTTRA to:

  • be more stable with PLA and PET
  • be printable as one or multiple parts (to glue together)
  • have multiple length to avoid “Aufdoppeln” and fit my needs at the sides where i need an extenion or longer clips.

You can find the “complete” parts (clip and base) to be printed in place without glue in 3 different lenght.

With this one you can choose between a big support under the clip lying or place it on its feet standing. If printed standing, the strength of the parts may not be optimal.

 

You can find the “separate” parts (clip and base as standalone) to be printed seperately in 3 different lenght.

With this one the feet and clip can be printed without supports.

 

All clips are uploaded in 3 different lenght:

  • original (as the one from IKEA)
  • +10mm (for the sides where you need a little extraspace)
  • +30mm (for some dishwashers were IKEA tells you to “Aufdoppeln”)

I choose:

  • PET with 0.4 nozzle and 0.2 layer hight
  • 5 walls and 2 bottom and 3 toplayers
  • 25% infill gyroid
  • skirt 2 lines at 1mm

Tagi