Soldering fumes extractor with carbon filter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another variation of fume extractor for soldering
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Another variation of fume extractor for soldering
It uses 120mm fan with higher CFM power, and activated carbon filters to filter some of nasty small particles
I also glued small LED strip on top of cover so it can shine some ligh on soldering parts.
Holder is inspired by Adam Savages work light, using the Loc-line hoses, with diameter of ½'' on the base it is attached to big clamp which I can put on table or shelf above work table.
some photos shows first version , originally I wanted to use HEPA filter for vacuum cleaner, but the pc fan cannot make high enough pressure to pull the air through filter and make reasonable air flow so I went with another filter type
here are parts from Aliexpress
Flexible hose https://www.aliexpress.com/item/1005001423227368.html?spm=a2g0o.order_list.order_list_main.85.19cd1802lL8T38
Activated carbon filter https://www.aliexpress.com/item/1005001680096777.html?spm=a2g0o.order_list.order_list_main.91.19cd1802lL8T38