Customizable Jabra Elite 7 Pro case cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy print two-part cover for the Jabra Elite 7 Pro case, or customize your cover!
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 1067
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a cover for the Jabra Elite 7 Pro case (I imagine it would fit the 7 Active too).
Easy print in two parts (top and bottom), then use Bi-adhesive tape to fix the case in place.
I used thick bi-adhesive tape, so the cover could not fit perfectly for you. In case, play with the x, y, and z multipliers in your slicer.
The cover_bottom_ring is designed such as the ring has the maximum mechanical strength.
Feature
- Print in two parts: cover_bottom and cover_top
- Full protection
- Bottom cover with and without hanging ring
- Easy grip to open the cover
Print tips
- Use the ‘fuzzy skin’ mode in Cura for a better grip
- Use gyroid infill for better shock-absorption
- Printed with 2 or 3 perimeters
- Use supports just for the bottom cover (for the USB-c plug-hole)
- To fit better your case you can play with the x,y,z multipliers in your slicer
Customize your cover
- You can find the step file with the models of the case and cover to customize as you want
Note
The USB-c plug-hole has been improved to better show the led light, so it is not the same as in the picture.
Enjoy!