1 / 1
Prusa Mini Detachable Cooling Duct for Revo Micro
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
x-carriage fully compatible to E3D's edition 2 print head, fan duct has least possible collision issues, angular design
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 954
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (51)Powiązane
X-Carriage:
- only slightly modified in comparison to boothyboothy's part:
- removed a feature that interfered with stock or E3D's edition 2 print head
- removed some unnecessary features at the back for a cleaner look
- holes for thermal inserts (M3) with an outer diameter of 4.2 mm
Part Cooling Fan Duct:
- basically a complete re-design inspired by the original by boothyboothy
- adapted to the geometry of Revo Micro
- reduced collision issues to the bare minimum, i.e.:
- if this duct collides with the screews at the back of the print bed, the silicon ring around the nozzle does too
- you loose 1 to 2 millimeter of print space
- no collisions during bed leveling or first layer height callibration
- a custom PINDA holder is required
PINDA holder:
- remix of the Prusa part to make room for the fan duct
X-carriage and PINDA holder do not require any special print settings.
The fan duct requires supports. A layer height of 0.2 mm and reduced layer height in some crucial areas helps with the overhangs. I printed it in PETG and it holds up fine so far (in comparison to others which deformed after a few hours of printing).
Kudos to robertgcode for his E3D Revo Micro STEP File. Helped a lot in designing this.