1 / 1
Prusa Mini Detachable Cooling Duct for Revo Micro
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
x-carriage fully compatible to E3D's edition 2 print head, fan duct has least possible collision issues, angular design
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 116
- Makes
- 2
- Views
- 959
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
X-Carriage:
- only slightly modified in comparison to boothyboothy's part:
- removed a feature that interfered with stock or E3D's edition 2 print head
- removed some unnecessary features at the back for a cleaner look
- holes for thermal inserts (M3) with an outer diameter of 4.2 mm
Part Cooling Fan Duct:
- basically a complete re-design inspired by the original by boothyboothy
- adapted to the geometry of Revo Micro
- reduced collision issues to the bare minimum, i.e.:
- if this duct collides with the screews at the back of the print bed, the silicon ring around the nozzle does too
- you loose 1 to 2 millimeter of print space
- no collisions during bed leveling or first layer height callibration
- a custom PINDA holder is required
PINDA holder:
- remix of the Prusa part to make room for the fan duct
X-carriage and PINDA holder do not require any special print settings.
The fan duct requires supports. A layer height of 0.2 mm and reduced layer height in some crucial areas helps with the overhangs. I printed it in PETG and it holds up fine so far (in comparison to others which deformed after a few hours of printing).
Kudos to robertgcode for his E3D Revo Micro STEP File. Helped a lot in designing this.