1 / 3
Build Plate Holder 2 Slots for Ikea Platsa Cabinet
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple quick 2 build plate holder for the Ikea Platsa Cabinet fit the pre-drilled holes, screw holes spacing set at…
- Ocena
- 5 / 5
- Polubienia
- 56
- Pobrania
- 351
- Wydruki
- 11
- Wyświetlenia
- 1964
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 11) (Komentarze: 22)Remiksy (0)Kolekcje (165)Powiązane
Simple quick 2 build plate holder for the Ikea Platsa cabinet fit the pre-drilled holes, screw holes spacing set at 20mm as per Ikea Platsa cabinet.
If you have any problems and design failures please comment back your feedback.
Version 2 - beefed up outer flaps , reduced material usage, stronger lighter faster print time.
Print instructions
Print standing up. Screw diameter 5.6mm