Sorbothane Mounting Foot - Bambu Labs X1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cup that covers the stock Bambu Labs X1C foot and provides a surface to mount a 1.25" (32mm) sound damping feet.
- Ocena
- 4,667 / 5
- Polubienia
- 101
- Pobrania
- 336
- Wydruki
- 6
- Wyświetlenia
- 3290
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
The sound damping feet can be found here on the US Amazon:
1.25" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive (4, 50 Duro) https://a.co/d/fzzKBZe
Make sure to read the weight class suggestions from the manufacturer, my machine does not have the AMS unit on top, and I have not researched how much heavier that makes it. The next tier up is 70 Durometer.
These are squishier than bumpers for most products. I think that's the magic, striking the right balance is important, hence my note to review the weight recommendations.
I printed 4 of these in PLA and stuck the adhesive backed bumpers to the bottom. Then I popped them onto the feet. It's a slip fit.
Vibration is noticeably reduced and took no time at all.