Liczymy pasujące modele…
The sound damping feet can be found here on the US Amazon: 1.25" Dia Sorbothane Hemisphere Rubber Bumper Non-Skid Feet with Adhesive (4, 50 Duro) https://a.co/d/fzzKBZe Make sure to read the weight class suggestions from the manufacturer,…
Printer feet should: Not wobble, be firmly connected to the frame, and support the printer Isolate and eliminate vibrations to improve print quality Dampen noise caused by those vibrations to improve quality of life In addition, if you…
This is a design imspired by the feet designed by Via_the_Verrazzano . I liked the design but really didnt like how the feet in no way mounted to the printer, but the printer just rested ontop of them. This is designed from scratch but…
These are effective vibration damper and noise reducer feet for any 3D printer using 3030 extruded aluminum beams as the frame, like the Prusa i3 MK3S. This was inspired by Plaidbear's design . My reasons for making my own design: I…
I’ve always liked the look of the D3vil Wears Prada printer feet, so I redesigned them to fit the Elegoo Centauri Carbon, with added compatibility for Sorbothane anti-vibration pads. If you’ve never heard of Sorbothane, it’s one of the…
Edit2: Added a new file that actually works. You may need to play with the spacing between the prongs that insert into the printer to get a tighter fit. I used some double sided tape to get them to stay stuck. This is a remix of…
These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…
This is a remix of the enclosure feet created by Prusa to allow use for either the 1 inch or 1.25 inch sorbothane hemisphere feet. I found the rubber feet underwhelming. I use sorbothane for the printer itself and it has almost completely…
Bambu AntiVibration Foot This is another Bambu Labs X1 Carbon foot I made in Fusion 360. I made this to be able to screw the foot directly to the printer with a M3x35 screw and washer. It has a removable support for the screw hole. I am…
Remodeled the 1.25" feet insert by @ToddFischer_601780 to have 1.5" diameter for use with X1-Carbon combo with AMS on top of the printer (which increases the weight to be outside the rating for smaller diameter feet at 50 durometer…
Remixed original model to account for a slightly wider sorbothane pad. Used DUR 70 1.5" sorbothane pads. Printed in PETG, but can be printed in PLA or other. Included bambu 3MF with my settings.
For dampening noises from vibrations, print four of these. Stick one Sorbothane damper under each. Fits nicely under each foot. https://www.amazon.com/dp/B00516DL5Y?psc=1&ref=ppx_yo2ov_dt_b_product_details I bought mine from Amazon.
I wasn't happy with the artifacts the original feet were adding to my input shaping measurements, so I ordered some Sorbothane isolation pads as replacement. This print is for a small holder that captures the pads. You'll need: Sorbothane…
Shoutout to evillvi77 and Real 3D Prints for the great designs which made this possible. My finished product used two of Evil's remixed feet and two of my own in the rear. This design enhances the load distribution through the QTY-6…
Not a remix, but based on Plaidbear's idea. See: https://www.printables.com/model/83918-prusa-mk3s-anti-vibration-noise-sorbothane-feet I couldn't find half-spheres in-stock, so went with discs. I used four 50 Duro 1" Discs by 0.5" thick.…
These mounts will fit onto the existing rubber feet beneath the Ender 3 V3 SE. They are meant to be used with the 1" IsolateIT! Sorbothane Hemisphere Rubber Bumper . Print the model as shown in the pictures with tree support. For tree…
Works for my Ender3 Print instructions Category: 3D Printer Parts
Bambulab P1P feet designed to hold 0.5" thick x 1" diameter, 50 durometer (3.5 - 7.0lb), tapered sorbothane discs. I picked them up from amazon: https://www.amazon.com/Isolate-Sorbothane-Vibration-Isolation-Circular/dp/B019O5A2EA/ Result…
Overview These feet are intended to be slipped directly over the existing feet for a Prusa XL printer, and over 1" diameter Sorbothane discs to dampen the vibrations from a Prusa XL. It appears moderately effective, although some larger…
Experience printing serenity with our Sorbothane foot adapters tailored for the Creality K1 printer. Crafted to diminish vibrations and mute operational noise, these adapters are designed to accommodate 1.25" (31.75mm) 50 Duro Sorbothane…
Designed feet to help with noise. Sorbothane is a strange material and arguably as good as the paver and foam method. Although, I don't have the tools to actually measure. Sorbothane can stain surfaces so that's why there are small pads.…
This is a remix of Prusa MK3s Anti Vibration Noise Sorbothane Feet to mount two Sorbothane dampeners. I have used it on the back of my printer for better performance on a larger/heavier mode at the back. Print Instructions Printer MK3s+…
In addition to my printer in the enclosure, I also wanted to isolate vibration through the enclosure as well. So I modified the feet for the printer box to accept a 50mm x 50mm square of sorbothane pad. Shopping List Sorbothane Pad…
A mount for the 1 inch Sorbothane anti-vibration pads https://www.amazon.com/dp/B07PF174F5/ref=twister_B07PFXD629?_encoding=UTF8&psc=1 I recommend the 70 Duro if just using 4, if using 6 or more 50 Duro should be better Originally made…
Thanks for looking at my first model. I used an 12mm long M3 socket head hex screw and a t-nut. I spaced it far enough away so I didn't have to remove the rubber feet on my SV06 Plus. I have included the step file if you need to modify…
MK3/S You will need the following for each MK3/S foot: 1x M4x10 button head screw 1x M4 nut 1x T-Nut ("TNut_3030_M4") 1x Foot of your choosing ("Foot_3030_XXmm") They will require a T-nut (remixed from:…
These parts allow attaching a sorbothane bushing + washer assembly to a 2040 aluminum extrusion. The base is designed to fit in the Prusa Box steel U-channel slots as a replacement for the squash ball bases.
These fit are intended for mounting a 1.5 inch, self-adhesive sorbothane hemisphere. Sorbothane is an excellent material for vibration isolation. I do believe they help quiet the printer and you also won't feel nearly as much movement…
A slightly modified version of clough42's version giving a little more support for both single wall and double wall thickness of the MakerFarm Prusa i3 and i3v. Completely redrawn in SketchUp, source files attached. Uses these sorbothane…
Tired of listening to your 3D printer buzz and vibrate its way through another print from the next room? These plastic feet allow you isolate your printer from the surface it's sitting on, quieting it considerably. UPDATE: Added a version…
I had cut up a yoga mat as as dampers for my Ender 3, but after awhile I found that they were flattened. Not wanting to mess around anymore, I thought I'd do the foot thing right and did some research. I ended with the Sorbothane discs as…
Cups to replace the rubber feet used on a Voron or PrinterForAnts. Uses Sorbothane rings like links below and some adhesive cork to keep them in place on a table…
This is a model that replaces the original feet with adapters for 50mm Sorbothane hemispheres. Sorbothane is a synthetic viscoelastic urethane polymer used as a shock absorber and vibration damper. Sorbothane is incompatible with wood:…
![[Printer Box] Feet for Sorbothane Dampeners](https://media.printables.com/media/prints/409088/images/3399489_5231780d-fc01-4b4c-b9f6-5fb048f98db0/2023-02-25-11_06_17-photo-google-photos-mozilla-firefox.png)
