DIY Magigoo Formula + Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't overspend on Magigoo; make something with the same effect at home! Ratio of clear school glue, isopropyl, water.
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 1004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is an easy to make DIY formula recommended by Reddit user “toasterinBflat”
Promotes bed adhesion, but also easy to remove after cooling!
Use 1:2:2 ratio of the following after dividing your container into 5 equal parts:
- 1 part Clear School Glue
- 2 parts 70-99% Isopropyl Alcohol
- 2 parts water (tap water should work fine)
As recommended by Reddit user “jbjones27” you can use the Staples 2 oz. Envelope Moistener as the applicator for this formula. You can download the files below to print a “holder” for 2 of the applicator bottles.
You can buy these on Amazon or Staples.
I have also designed a cap/lid/cover for these bottles to avoid them drying out or spilling. Check it out here.
Includes a STEP file and STL file, making it easy for anyone with access to a 3D printer to create their own.
The files also allow for customization and modification, so you can make derivative works.
--------（ ^_^）o自自o（^_^ ）--------
If you'd like to support me you can post a make, comment, give me a follow, and/or buy me a coffee here.