1 / 7
Voron 0.1 / 0.2 Ikea Shelf Mod LACK Wall shelf, white, 30x26 cm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here i have my Voron 0.1 Shelf which uses a Ikea Shelf.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (7)Powiązane
Here i have my Voron 0.1 Shelf which uses a Ikea Shelf, i used some Supports under just to give it extra strength.
Requires 4 Heat inserts (standard voron ones)
4x 25mm screws
2x Wood screws for the back to hole the plate on.
I have included the colour letters which you can print in your choice of colour, I used the press fitted letters, if your tolerances are not great, i would recommend the glue in ones, just print 1 of each and see which fits better on your print.
Print with 20% infil 0.2 Layer height. Easy print and to install.