1 / 7
Voron 0.1 / 0.2 Ikea Shelf Mod LACK Wall shelf, white, 30x26 cm — image 1
1 / 7

Voron 0.1 / 0.2 Ikea Shelf Mod LACK Wall shelf, white, 30x26 cm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here i have my Voron 0.1 Shelf which uses a Ikea Shelf.

Rating
0 / 5
Likes
9
Downloads
15
Makes
0
Views
576
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Here i have my Voron 0.1 Shelf which uses a Ikea Shelf, i used some Supports under just to give it extra strength.
 

Requires 4 Heat inserts (standard voron ones)

4x 25mm screws

2x Wood screws for the back to hole the plate on.

I have included the colour letters which you can print in your choice of colour, I used the press fitted letters, if your tolerances are not great, i would recommend the glue in ones, just print 1 of each and see which fits better on your print.

Print with 20% infil 0.2 Layer height. Easy print and to install.