1 / 2
Skadis/wall Gridfinity 1x5 base plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a Gridfinity 1x5 base plate for mounting to Skadis or a wall. Uses Skadis T-nuts
- Ocena
- 0 / 5
- Polubienia
- 62
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 1978
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (191)Powiązane
This is supposed to be used on a Skadis IKEA wall together with T-nuts.
You could also mount it directly to a wall or a cupboard.
Use M3 screws.
I made enough holes to use 5 screws and T-nuts, but I only use 3 and it works great so far.
