DualSense Edge Extended Sticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
15.5mm high extended joysticks
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 263
- Wydruki
- 2
- Wyświetlenia
- 1496
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I have been playing with extended joystick caps for years, when i purchased the DualSense Edge i found the sticks to be just a tad to short so I made these. I am glad to alter them in any way folks would like if they don't care for this size. these com in at 15.5 mm high from the peak of the dome on the joystick module. you may want to flip the print over to print from the thumb pad up rather than the notches up. it requires no supports if you do so and print at .7mm on Prusa Mini. they give the satisfactory click sound when you put them on and feel great.
Print: 1.5mm or smaller, standard print settings work fine. Print 100% infill if you want super robust.