782 modeli
I redesigned the v2 version to be more rounded and sleek. Product Introduction: Hello everyone! I'm excited to share with you my 3D printed stand design for the PS5 controller. This stand is perfect for storing and displaying your PS5…
For those who want to make commercial use of the printed parts, access the link below to find the 3D model licensed for commercial use and more complete editable files. PS5 Dualsense Stand for Comercial Use + Step File I made this support…
Mount your Airsense 11 CPAP machine to the wall to free up night stand space. Water reservoir is easily accessible. Incorporates hooks for holding the tube up. I printed this on my Ender 3 V2 with .28 resolution, 3 walls, 5% infill, using…
A remix of kiwithreed's design from Thingiverse . Modified the following: Removed headphone holder. Simplified the design so it prints with drastically less filament. 3M Command Strip (Medium) compatible. Recommended print settings (.3mf…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
A simple bracket holding the case for a Raspberry Pi 3 B+ and SenseHat boards.... serving Octoprint etc. 2 M3 cap screws required. Print instructions ABS no supports.
A stand for two ps5 controllers. This model is a remix from a model for one controller from La Guía del Mando (can't reference it as it has since been either switched to draft or has been deleted). I did a few modifications such as…
Onimask PS5 DualSense Controller Stand
This is a re-make of Thingiverse user Stridershouse's design. I redesigned it to have no logos, have a smaller footprint, and to mount with command strips or any other adhesive-based solution instead of using screws. There is a…
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
PS5 DualSense controller holder for Ikea Skadis panel. More vertical variant of @zenzmatz_213590 holder
I designed a GTA VI Dualsense Controller Stand for your Playstation controller.
Yet another dualsense holder for gridfinity. this one has the controller more vertically and a slot under for storing charging cable. It takes up "2x4" grid spaces and no holes for magnets. Printed on a P1S with the 0.16mm optimal profile…
Simple yet functional replica of Hisense 32A series Stand Unit. !! Check the PDF drawing if dimensions match !! There is a small letter L or R in the same spot as in original feet. Can be printed from any material, but preferably with…
Stand for the DualSense (PS5) controller
Stand for PS5 DualSense controller. 0.2 or 0.3 layer, 10-15% infill
PS5 DualSense Controller Stand
Not beginner-friendly ⚠ Commercial Use Notice: If you intend to sell physical prints of this model, please purchase the licensed version here: 👉 Buy the commercial license on Etsy 🔒 License Terms: This model is for personal use only.…
Designed for 0.1mm layer height (0.2mm first layer height is fine). No supports required. Use 1mm thick double-sided tape pieces UPDATE: added BSP D9 version with +0.4mm clearance
supporto per dualsense! sono 4 versioni che si differiscono per posizione e per tipo di dualsense! V1: DUALSENSE STARDARD POSIZIONA SU PS5 V2: DUALSENSE CON EXTREMERATE BACK BOTTON PER PS5 V3: DUALSENSE BACK BUTTON SUPPORTO MAGNETICO V4:…
Stand per dualsense, stampa FDM in PLA e in due pezzi, lo stand e il logo che andrà incastrato.
Adapter to hold Starsense Explorer dock from Celestron telescopes. Should be compatible with the unit from the LT80, LT70, LT114, 8", 10" and 12" Dobsonian models. Basically the ones that have the drop in wedge. Completely updated the…
V případě, že se Vám výtisk povede, prosím přidejte fotografii. DĚKUJI If the printout is successful for you, please add a photo. THANK YOU Česky: Držák na stěnu pro ovladač Dualsense na Playstation 5 s možností vložení nabíjecího…
Just a simple Container for Senseo Coffee Pads.
Quick manually measured model to test my and others' designs for fitment and orientation. I don't currently plan to print it, but if I do I'll print it vertically with a brim. The pics here are rendered from the textured Fusion model…
full files: https://www.etsy.com/listing/1463856418/zs-a1-3d-printed-symmetric-wireless assembly instructions for full mouse: https://medium.com/@zoroseerus/zs-a1-3d-printed-symmetric-wireless-mouse-guide-607e6e8e19aa twitter:…
I made this DualSense Phone mount for Quadlock phone case. Easy to use, i think looks really well on the controller. It is foldable, you can adjust the phone angle and also easy to carry when it is folded. I printed with PETG, 25% infill,…
This is an oddly specific gadget, allowing mounting of this particular PS5 DualSense Edge controller charger to plantation blind rods of width ~13.7 mm and depth ~15.3 mm. I included the STEP file for easier remixing of this part for…
A vase that I made one day on a whim.
Compact enclosure for the SpoolSense Scanner Remixed from https://www.printables.com/model/1698547
I needed a larger Container for my Senseo Coffee Pads because I mostly buy the 40 piece packs. This Container will exactly hold 40 Coffee Pads. i made 2 versions: one with a place to put a 'nametag' so you don't forget what Pads are in…
A minimalistic cover that protects your analog sticks. It goes over the track pad and, using a nub, snaps in place over the headphone jack. See Gif for usage. Works well for my use case of tossing the controller into my backpack. Use at…
I remixed my PS Portal Sticklocks to fit a dualsense Controller, cause i found the small form factor handy.
Similar to the Xbox Series X|S stand I did, this this the Playstation 5 dualsense controller stand. The controller fits perfect onto the stand and will not slide out. If you have any issues or questions please feel free to reach out to me…
This stand is similar to the other Playstation 5 Dualsense Controller Stand I posted but this one has a cut out in the back that uses less filament. It also has the PS5 title. If you have any issues or questions please feel free to reach…
The footprint of my 50" Hisense TV is 34 inches and I needed it to fit on a narrower cabinet. This adapter moves the legs in approximately 3 inches on each side. I use M5 brass inserts for the original leg to attach to the adapter as it…
Because I wanted to have my X-Sense RC01 remote in an accessible location where I can easily grab it, I created this holder for it. It has a little indentation on the back to fit some double sided tape (my tape is 1.0mm thick, so I made…
A casing for the Xiao ESP32 S3 Sense that is compatible for most Prusa printers, as the mount is attached to the 3030 aluminium extrusion. Notes: I won't be covering the software section of this camera, but you could follow this guide:…
This print uses 4 unique filaments Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Red At layer #20 (1.68mm) swap to Yellow At layer #24 (2mm) swap to White for the rest.
Seeed Studio Sensecap T1000-E charging cradle/puck with magnet attachment
Seeed Studio XIAO ESP32S3 Sense leverages dual-core ESP32S3 chip, supporting both Wi-Fi and BLE wireless connectivities, which allows battery charge. It integrates built-in camera sensor, digital microphone. It offers 8MB PSRAM, 8MB…
Seeed Studio XIAO nRF52840 powered by by Nordic Semiconductor's nRF52840 chipset, is carrying wireless capability for the first time and it supports Bluetooth 5.0, also able to operate with low power consumption. It will be your best…
Use two 6x3 (voron spec) magnets on each hole. Check the polarity of the magnets carefully. Use a double sided tape to mount on to the wall. I used PETG filament but any filament should be OK.
Simple foot extender for swiss sense beds, I created it for an extra 40mm under the bed for a roomba to fit under. Feel free to remix this with different sizes for your needs. Dimensions: 71mm inner diameter for the slide in fit of the…
SenseCAP Solar Node P1-Pro - Mast Holder Adapter (10-70mm) This is a custom mounting adapter designed for the SenseCAP Solar Node P1-Pro . While the original accessory included by the manufacturer is limited to masts or pipes with a…
🎮 DualSense Controller Storage Case – 3D Printable STL This is a 3D printable storage case designed for the PlayStation 5 DualSense controller . It features a rugged, compact design with a precise internal fit, perfect for safe storage or…
I designed this enclosure for a project that uses the Seeed SenseCAP Indicator D1L (the "Meshtastic" version with external antenna), specifically to hide some external electronics connected to the Grove connectors at the back. This model…
I wanted to be able to mount my T1000-E to my Multiboard, so here we are. Supports are necessary.
Das Problem Der Pumpenfilter deiner Hisense Waschmaschine sammelt regelmäßig Flusen, Münzen und Verschmutzungen. Beim Ablassen des Filters läuft das Wasser häufig unkontrolliert über den Boden – eine lästige und zeitaufwändige…
# Babysense HD S2 Stand / Mount Extension (100mm) (Deutsche Beschreibung unten) This is a custom-designed stand for the Babysense HD S2 baby monitor camera. It raises the camera by 100 mm (10 cm) to provide a significantly better viewing…
Deutsch 🇩🇪 Diese Halterung ist ein Remix , entwickelt um einen X-Sense X501-M Rauchmelder sicher in einem Mandalorian Helm zu befestigen und den kompletten Aufbau auf einem 3D-Drucker-Gehäuse zu platzieren. Statt Kleben kommt eine…
Nádoba je vytvořena pro pračku AEG ProSense L6SNE26SC skládá se ze dvou dílů. Průměr 62 mmm. Inspiraci jsem převzal od: https://www.printables.com/model/1536585-lg-washing-machine-pump-filter-drain-bucket The container is made for the AEG…
Floaters inside Senseo machines sometimes starts to leak and stop floating, resulting in the machine not detecting when there is enough water in the tank. This replacement should resolve that issue. This floater should fit in the HD786*,…
🐉 Forget AI. You need the Dragon. We realized modern 3D printers have a flaw: They are boring. We have LiDAR, AI spaghetti detection, and accelerometers... but none of them have soul . None of them look at you with disappointment when you…
The concept: on some parts of the Body (forearms for example) you cant feel a difference between the Two tip version and the one tip version. But on other parts (hands for example) you can very clearly feel the difference between one and…
Recommended print settings: Material: PLA or PETG Layer Height: 0.2 mm or less Infill % : 15+ Supports: No Print Orientation: Default as modeled Brim: Optional
Not for printing, but for use as a reference model (for space claim, making compatible designs, etc.) Includes recesses for charging port, button, and LED position. For more information on this product, see :…
OpenPrintSense - 3D Printed BLE Flex Sensor Glove OpenPrintSense is an open-source project that combines 3D printing, hardware, and software to create a wearable finger tracking system. The key innovation is a fully 3D-printed flex sensor…
Rigid 27 April 2026: New! I strongly recommend using the flex model over the rigid model, because the rigid is not going to be as gentle on your controller, however two people asked for it so I've added it. To use this, you MUST ADD PUTTY…
Specifically designed for my desk that already has L bracket installed.
A portafilter Holder made for the Fiorenzato All Grounds Sense. The main issue with the built in portafilter holder is that it cannot hold a portafilter with a dosing ring. This attachment gives you some extra height to fit a portafilter…
Sensory pad for children. Supports the development of motor skills and creativity.
Sensory pad for children. Supports the development of motor skills and creativity.
Sensory pad for children. Supports the development of motor skills and creativity.
Sensory pad for children. Supports the development of motor skills and creativity.
Sensory pad for children. Supports the development of motor skills and creativity.
My dog chewed up the original nozzle so I created a replacement.
Organizer für Standast Schrauben / Hülsensets Desktopversion
I had an old 8bitdo phone mount for Xbox one controllers lying around and wanted to use it with my Dualsense, so I made this remix to serve as an adapter for it. This is only the part that attaches to the controller and does not include…
100x160mm sign, reading "Let me explain how this makes intuitive sense" Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs…
3D Model for the pcb and enclosures of the ESP_Sense_R1.5A These 3D Files are to help design your own case or mounting solution. Please note that the files are missing the buzzers, reed switch, and pads. Orthographic images available…
This model allows you to mount your Sensecap T1000E to your dog's collar. This makes for a great pet tracker. While it's easiest to print flat, angled printing will provide a much stronger print.
tv stand for hisense tv. I have only tested with 34in. version so test with your own tv
The Seeed Studio SenseCAP P1 Pro comes with a metal extension mount, but the stock pole clamp only fits poles 70–100mm in diameter. If you're mounting on a standard 1-inch (25.4mm) pipe or mast, this adapter bridges the gap. This print…
This is a 4-part standalone enclosure designed for the SpoolSense project, built specifically to house an ESP32-S3-Zero , PN5180 NFC reader , and a 16x2 I2C LCD display . The goal of this design was to create a clean, desk-friendly…
this is a remix of two models, one is a 3d scan of a ps5 controller and the other is multiconnect which in my opinion is just a better way to connect parts to multiboard. your controller should fit very nicely because my model uses an…
This is a simplified 3D model of a EC-Sense "TB600B" SO2 Sensor. I created/used it as a reference model while designing the enclosure for a volcanic drone payload project. The model is mainly intended for mechanical fitting, layout…
A clip to mount a macro lens for the P2 thermal camera. Useful for PCB inspection. The used lens is a Cloudray 12mm lens with a focal length of 63.5mm. PN is: USFL05D12F63 Printed in nylon via JLCPCB printing service.
For those who want to make commercial use of the printed parts, access the link below to find the 3D model licensed for commercial use and more complete editable files. PS5 Dualsense Stand for Comercial Use + Step File I made this support…
Keep your Senseo pods organized and within reach with this compact storage box. Two sizes in one design: - 18 regular Senseo pods - 8 Senseo Latte/cappuccino pods (the thick ones) Comes with 5 ready-to-print lids: - Regular - Choco -…
Added a gridfinity mount to a Fitbit charger. I also shortened how far the charger sticks out so it all fits in a single square. Also print on it's side
Mount for console controllers that has a ball-end that works with RAM mount arms . 2 sizes available. the ps4 version is a kitbash of Akaki's mount piece, so it is a bit of a mess, but works.
Upper part to fit a iPhone 15 pro Max with Apple clear case. One version in tight fit. other version in loose fit.
Print on the side with a brim. The legs have a tendency to warp unless you're printing in an enclosure. The original model was modified to fit a smaller TV. There is a second file with tapered holes to accept a larger screw head.
the case for an air quality monitor. Built with Sparkfun Parts Powered by an Artemis Nano
Yet another coffee knock box. Holds the senseo pad in an upside-down position so it can dry between uses. Required hardware: Wooden rod of around 28mm diameter , at least 16cm long. The one I used is 18.5cm long . Warning: Some water may…
The self tap option print best and works well, mine has been lasting since April 2024. The screw and nut option was made on user requests and results in very thin walls in some areas. See detailed notes from users in makes. The slider…
So I'm telling on myself a bit here, but yea, I acquired a Lovesense solace and I wasn't thrilled with the desk mount they had included. It doesn't have a lot of range. I did have a microphone arm and well I started designing. I found out…
This was a CAD exercise. The need for the pad dispenser disappeared. Perhaps this is helpful for you. It would not be possible injection molding this, because I didn't do necessary adjustments. But as a dummy it might be the right thing…
I needed a larger Container for my Senseo Coffee Pads because I mostly buy the 40 piece packs. This Container will exactly hold 40 Coffee Pads. i made 2 versions: one with a place to put a 'nametag' so you don't forget what Pads are in…
