1 / 2
Nanoleaf Sense+ 86 size plate for mounting with double sided tape
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is 86x86 size to be used with 86 size switches such as Aqara H1+ (usually Chinese switches).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Use two 6x3 (voron spec) magnets on each hole. Check the polarity of the magnets carefully. Use a double sided tape to mount on to the wall.
I used PETG filament but any filament should be OK.
