V6 Nozzle Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a great little nozzle box made to print in parts to allow more customisation
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Found the great little Nozzle Box by @max102 but wanted it for 0.25, 0.4 and 0.6 mm nozzles (and wanted a decimal place rather than a comma :D)
I also wanted to be able to use a simple colour swap to print the text in a different colour without affecting the outer box/case so I remixed into component parts.
I also changed the text etc on the lid and the text etc on the insert.
To print the text on the lid simply open the “Lettering.3mf”, slice and print without a skirt then once done remove the purge line but leave the text on the build plate and then open/slice/print the “Case-With lettering.3mf” and it should work just fine.
If you prefer the case without lettering that is also included “Case-No Lettering”
For the insert part just open/slice/print “Insert.3mf” with a colour change at 9.2mm layer height if you want the text in a different colour.
To assemble I then glued the inset inside the case with a small amount of superglue.