Honeycomb Wall - Portable Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn honeycomb wall in to a portable stand
- Ocena
- 4,667 / 5
- Polubienia
- 330
- Pobrania
- 596
- Wydruki
- 3
- Wyświetlenia
- 3343
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Turns the honeycomb wall holder into a portable honeycomb stand.
It requires the following parts to be printed
- 2 x HSW 5xWide Base Support
- 2 x Hex Top Joiner - 47 Degree Angle
- 4 x Hex Bottom Joiner - 66 Degree Angle
- 8 x insert-empty (rotated version)
In this instance used with 2 x wall-honeycomb-224x190size(mk3s).
Stand is quite stable, scientifically tested using watch collection.
Relies on the rotated version of “insert-empty” hex part used in the HoneyComb Wall due to wall being used on its side. https://www.printables.com/model/468300-honeycomb-wall-insert-empty-hex-rotated-30deg-hex-
Hex insert pegs designed with flex in mind so that holder can be inserted without requiring much force to insert or remove from wall.
STL's are ready to print without need for supports. Printed on MK2, MK3 and X1C using PLA+, PETG with no issues.
Designed with .20mm layer height in mind.