Rook 2020 Bottom Cover Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for a standard Rook 2020 by Rolohaun
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 463
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Bottom plate for the Rook 2020. Cutouts for the z belt, endstop, and z rods. Tested with a creality endstop, but should work with the BOM z endstop fine since it's smaller. It is a just a cosmetic plate, 1mm height should be enough to prevent sagging and flexible enough to be installed after assembling the printer. You need a 240mm bed to print in a single piece or could split it up to fit your smaller build plate. Mirror it in your slicer for endstop on other side.
Uses m3 bolts+tnuts to stay in place.
Rook 2020 by Rolohaun Design | Download free STL model | Printables.com
Versions:
- Test corner piece: 1/4th corner test fit
- Single piece symmetrical: what I used and is pictured
- Single piece no cutout bottom: removes the rod cutouts
- Single piece no cutout bottom max: no rod cutouts and covers an extra 20mm of the extrusions
- Single piece max coverup: covers up the most. Might need to cut the edges to make sure the piece can bend into place.
Note: Printed my piece in Eryone coextrusion black/white PLA with Hilbert curve top layer.