Rook 2020 Bottom Cover Plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for a standard Rook 2020 by Rolohaun
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 46
- Makes
- 0
- Views
- 463
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Bottom plate for the Rook 2020. Cutouts for the z belt, endstop, and z rods. Tested with a creality endstop, but should work with the BOM z endstop fine since it's smaller. It is a just a cosmetic plate, 1mm height should be enough to prevent sagging and flexible enough to be installed after assembling the printer. You need a 240mm bed to print in a single piece or could split it up to fit your smaller build plate. Mirror it in your slicer for endstop on other side.
Uses m3 bolts+tnuts to stay in place.
Rook 2020 by Rolohaun Design | Download free STL model | Printables.com
Versions:
- Test corner piece: 1/4th corner test fit
- Single piece symmetrical: what I used and is pictured
- Single piece no cutout bottom: removes the rod cutouts
- Single piece no cutout bottom max: no rod cutouts and covers an extra 20mm of the extrusions
- Single piece max coverup: covers up the most. Might need to cut the edges to make sure the piece can bend into place.
Note: Printed my piece in Eryone coextrusion black/white PLA with Hilbert curve top layer.