Raspberry Pi Pico Enclosure for dual ADXL345 accelerometers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another Raspberry Pi Pico enclosure. This one has openings for the USB port as well as two sets of wires.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 716
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Yet another Raspberry Pi Pico enclosure. This one has openings for the USB port as well as two sets of wires for connecting ADXL345 accelerometers for input shaping on a bed slinger. The fastener holes are sized for an M2 threaded heat-set insert.
This is my first enclosure design, so any constructive criticism is welcome!
Hardware list:
2 x ADXL345 accelerometers (https://www.amazon.com/gp/product/B094NHTPKR)
1 x Raspberry Pi Pico (https://www.amazon.com/gp/product/B08ZSKMJJD)
8 x M2 threaded heat-set inserts
4 x M2x4mm machine screw
4 x M2x6mm machine screw
USB cable
Wire to connect accelerometers to the Pi
Wiring:
| ADXL345-1 | Raspberry Pi Pico |
| GND | GND (pin 38) |
| VCC | 3V3 (pin 36) |
| CS | GP1 (pin 2) |
| SDO | GP0 (pin 1) |
| SDA | GP3 (pin 5) |
| SCL | GP2 (pin 4) |
| ADXL345-2 | Raspberry Pi Pico |
| GND | GND (pin 38) |
| VCC | 3V3 (pin 36) |
| CS | GP9 (pin 12) |
| SDO | GP8 (pin 11) |
| SDA | GP11 (pin 15) |
| SCL | GP10 (pin 14) |