Raspberry Pi Pico Enclosure for dual ADXL345 accelerometers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another Raspberry Pi Pico enclosure. This one has openings for the USB port as well as two sets of wires.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 48
- Makes
- 1
- Views
- 716
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Yet another Raspberry Pi Pico enclosure. This one has openings for the USB port as well as two sets of wires for connecting ADXL345 accelerometers for input shaping on a bed slinger. The fastener holes are sized for an M2 threaded heat-set insert.
This is my first enclosure design, so any constructive criticism is welcome!
Hardware list:
2 x ADXL345 accelerometers (https://www.amazon.com/gp/product/B094NHTPKR)
1 x Raspberry Pi Pico (https://www.amazon.com/gp/product/B08ZSKMJJD)
8 x M2 threaded heat-set inserts
4 x M2x4mm machine screw
4 x M2x6mm machine screw
USB cable
Wire to connect accelerometers to the Pi
Wiring:
| ADXL345-1 | Raspberry Pi Pico |
| GND | GND (pin 38) |
| VCC | 3V3 (pin 36) |
| CS | GP1 (pin 2) |
| SDO | GP0 (pin 1) |
| SDA | GP3 (pin 5) |
| SCL | GP2 (pin 4) |
| ADXL345-2 | Raspberry Pi Pico |
| GND | GND (pin 38) |
| VCC | 3V3 (pin 36) |
| CS | GP9 (pin 12) |
| SDO | GP8 (pin 11) |
| SDA | GP11 (pin 15) |
| SCL | GP10 (pin 14) |