1 / 4
Logitech MX Master scroll wheel replacement rubber rings
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the rubber rings on the scroll wheel that get old and crack or get gooey
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 2612
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- GNU General Public License v2.0
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
This replaces the rubber rings on the scroll wheel that get old and crack or get gooey.
Print settings
- Filament: Print this in TPU or TPE
- Perimeters: 3
- Fuzzy skin: Outside walls
Make sure when you print it you enable fuzzy skin outer walls
Installation
- You will need to take the mouse completely apart. Take it apart to the stage where you take the whole scroll wheel assembly out (Clear plastic, motor and wheel as one unit). Once done you will need to pop the scroll wheel our from the clear plastic holder. Be carful here not to crack the plastic. You will need to pop one side out first using a small flat head screwdriver, then while trying to hold the side you just popped out out, then try pop the other side out.
- Once out you can use a toothpick or small screwdriver to scrape out the old rubber. This should be quite easy as it seems to just fall apart.
- Once that is done you should be able to slot the new rubber rings over and into the grove just like a rubber band