1 / 7
Remix eines der besten Doppelkanäle für SW-X1 (4020) — zdjęcie 1
1 / 7

Remix eines der besten Doppelkanäle für SW-X1 (4020)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mir hat dieser Fan Duct zugesagt. War auch irgendwo als Empfehlung zu lesen. Aber die Befestigung hat bei mir nicht…

Ocena
0 / 5
Polubienia
1
Pobrania
32
Wydruki
0
Wyświetlenia
265
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Mir hat dieser Fan Duct zugesagt. War auch irgendwo als Empfehlung zu lesen. Aber die Befestigung hat bei mir nicht funktioniert und kleben wollte ich nicht. So habe ich diesen eine Halterung hinzugefügt.

Da am Genius Pro und dem X2 der Sensor im Weg ist, verwende ich dort Alternative. Das ist ein halbrunder, der auch sehr gut funktioniert. Diesen habe ich hier noch angefügt.

Ich habe Cura 4.8 verwendet und da keine Einhausung für den Drucker vorhanden ist, habe ich mit aktiviertem Windschutz bis 10 mm Höhe gedruckt.

Mehr für den Drucker gibt es hier: https://www.thingiverse.com/hans-g/collections/3d-printer

Ein Danke geht an: https://www.thingiverse.com/thing:4559283


This Fan Duct appealed to me. Was also somewhere to read as a recommendation. But the attachment has not worked for me and glue I did not want. So I have added this a bracket.

Since the sensor is in the way on the Genius Pro and the X2, I use an alternative there. This is a semicircular one that also works very well. I have attached it here.

I used Cura 4.8 and since there is no enclosure for the printer, I printed with the windshield activated up to 10 mm height.

More for the printer can be found here: https://www.thingiverse.com/hans-g/collections/3d-printer

A thank you goes to: https://www.thingiverse.com/thing:4559283

Print Settings

Printer:

Artillery Genius

Rafts:

Yes

Supports:

No

Resolution:

0,12

Infill:

100

Filament:

Material4print ASA

grey


Notes:

Cura 4.8.0, Windschutz aktiv bis 10 mm
Cura 4.8.0, draft shield active up to 10 mm

Post-Printing

Category: 3D Printer Accessories

Tagi