1 / 4
Big drybox clip (PANTRY 11L EAN 8694064003828) — zdjęcie 1
1 / 4

Big drybox clip (PANTRY 11L EAN 8694064003828)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

0,66 € – 0,80 € netto (bez VAT)

Dla pliku: Big Dry Box Clip_0.2mm_PETG_MINI_48m_4instances.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,73 € netto (środek widełek).

Masa podana przez autora
8 g
Czas druku podany przez autora
48,6 min
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Clip for keeping lid closed on drybox made from PANTRY 11L box, EAN 8694064003828, produced in Turkey.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
255
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

About
Clips to keep lid closed for drybox from  PANTRY storage box 11L (EAN 8694064003828).
Box has dimensions for 2 standard 7cm filament spools.

Unfortunately the top edge is flat and it does not give edge to grasp the clip, so I had to apply thin film of hot glue so that the clip does not slips out.

Please give a like and post makes and provide comments for further improvements.

Print

PETG 0.20mm SPEED, no supports, 20% infill. You can print one instance with 5mm height to see if it fits.

Installation

  • clean edges of the box with isopropyl, wait until it dries
  • use hot thermo glue and make a 0.5mm thin layer for about 20mm in length
  • wait until glue is cold
  • slide in bottom part of the clip under the edge and then snap it over the top part. Another option is to install the clip and slide it sideways on to the glue.

     

Tagi