Garmin Zumo XT active desk stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A powered desk stand for the Garmin Zumo XT. Easier to use than the Mini-USB connector.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 794
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
A powered desk stand for the Garmin Zumo XT - and possibly others, the XT2 certainly should also work. You have to source pogo pins, e.g. from AliExpress or eBay. Diameter of the bores in the plastic receptacle holding the pogo pins is 1mm, but of course at that fine diameter the print isn't that accurate. Go for appox 1mm diameter pogo pins and use a little heat and a needle to make things fit.
All connecting pints are “friction fit”, when printing with a 4mm nozzle and 0.2mm layer height no glue should be necessary.
Finally, power the stand with an old USB cable, the lower pin (pin 1) is ground, the upper one (pin 3) is +5V. Have a power supply that is able to provide at least 1A and you're good to go - WiFi updates, playing around with the XT, using it to play music, all good now.