Secret Hydra-Secret Hitler Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Secret Hitler remixed with Marvel
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 925
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
We all love Secret Hitler, or you wouldn't be on this page. I was all geared up to print a version of the game when I found Barevich's version called Secret Voldemort. Amazing! Then I got thinking, if pop culture is so great, why not make an MCU version. Behold-Secret Hydra! I wanted to go for Secret Empire but focus groups (my wife and kids) had no idea what I was talking about, but you clearly know where I was going!
A few things to point out. I took many of the good things from all the other Secret Hitler games here on Thingiverse and added them here.
-The main baddie is Red Skull, but I guess you could pick someone else.
-Most of it all was printed on a .4mm nozzle. I did try using a .2 on the Directive, Party Idents, and character cards. For me, I couldn't get great results, but you might.
-Slider to remember failed governments actually slides!
-Passports actually close! They are also split so you can show just your identification and not your character cards.
-Multiple characters to choose from for both SHIELD and Hydra.
-A refined technique to print multiple colors on the same layer (more below. The only items that can even do this are the titles {secretary and director}, party ident, and voting cards).
-Make sure you look at the photos to see how I made them multiple colors by doing a filament change on certain layers.
What to print-
-10 passports (this is a minimum 5 player game)
-6 SHIELD characters and party idents (I have more than that to pick from. Either swap them before each game or make the hard choice and pick your favorites.
-4 Hydra idents
-20 vote frames
-10 vote no
-10 vote yes
-11 Hydra Directives
-6 Shield Directives
-Everything else is just a print of one
Rules for game https://secrethitler.com/assets/Secret_Hitler_Rules.pdf
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Supports:
Doesn't Matter
Resolution:
.4 and .2
Infill:
10%
Post-Printing
Some Assembly Required
Most of the pieces print just fine with no post-processing needed. You will need to glue (make sure you use super glue and not hot glue) the party identification and characters into the passports. If you don't, they're guaranteed to fall out causing you to restart the game.
Some pieces may need to be filed down, but not by much as the tolerances are set fairly good. The lid of the box had to be filed down on one side in order to fit, but not by much.If you want to try your hand at changing filament on the same layer, watch these videos.
Category: Games