1 / 5
Lukisegler-NG XS e mini RC-glider (Update to brushless electric drive) — zdjęcie 1
1 / 5

Lukisegler-NG XS e mini RC-glider (Update to brushless electric drive)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Update of the Lukisegler-NG XS mini RC-glider to brushless electric drive

Ocena
0 / 5
Polubienia
42
Pobrania
240
Wydruki
0
Wyświetlenia
2581
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lukisegler-NG XS e, Update to brushless electric drive

  •    Wingspan: approx. 900  mm
  •    Fuselage length: approx. 500 mm
  •    Take-off weight (LW-PLA): approx. 120 g
  •    Controls: elevator / aileron / motor
  •    Center of gravity: 8 mm behind the profile nose
  •    Rudder deflections: aileron 15-25°, EXPO-setting: -10% for direct respond
                                            elevator: 10°, EXPO-setting: 20%
  •    Motor: BETAFPV 1103 11000KV Brushless Motor
  •    ESC: 12A brushless-ESC
  •    Propeller: 65mm diameter (drone propeller)
  •    Battery: 2s Lipo 250 mAh

I have updated the Lukisegler-NG XS with a brushless electrical drive. 

ATTENTION! Never run the brushless motor without load on full throttle! If the ESC does not catch the right communtation time the motor can be damaged from overcurrent!

I have also added a cowling and a spinner for the propeller.
The cowling is glued to the fuselage and adjusted to the height of the motor.
The spinner is plugged onto the motor axis. Then the propeller is attached on the axis.

The bulkhead is optimized for low weight (it is different from the version shown in the build-video).

If you decide to build the model, I would appreciate a short report on your experience in the comments or you can contact me via the prusaprinter messenger.
This would help me a lot to improve the design my new models or to fix errors in the actual models.

Tagi